Combination Punch/Laser Cutting
- Trumpf Trumatic 600L Laserpress – Combination machine with 1800 W laser for cutting, and 25 ton punching force for steel up to 48” x 120” x 5/16” thick
- Strippit Fabri-Center FC1250 – Combination machine with 1350W laser for cutting and punching steel up to 3/8” thick
Laser Cutting
- Strippit/LVD Impuls 3020 – Straight laser cutting machine with shuttle table and 3000W laser for cutting steel up to 80” x 120” x 3/4” thick
Press Brakes
- 144 Ton Trumpf CNC, Model V130 – 121” bed, automatic sheet lift and CNC crowning
- 95 Ton Trumpf CNC, Model V85S – 100” bed, automatic sheet lift and CNC crowning
- 225 Ton Pacific – 12’ bed with CNC-1000 Autogauge Controller
- 90 Ton Chicago – 12’ bed with G24 Autogauge Controller
- 90 Ton Cincinnati – 12’ bed
- 150 Ton DI-ACRO – 12’ bed with CNC gauging system
- 75Ton O.T.C. hydraulic press
Shearing
- Durma Hydraulic Shear with swing beam mechanism, cuts steel ranging from 0.047” to 1/2” thick and up to 13’ wide
- Pexto – 14 ga. x 6’
Punching
- Trumpf Trumatic TC2020R Punch with auto load/unload, 20 ton, CNC for punching steel up to 50” x 100” x 1/4” thick
- Strippit Super 30-40 HD punch press
- 60 Ton Bliss punch press
- 55 Ton Enterprise punch press
Robotic Welding
- Robotic Welding System with Panasonic Model VR-006ALII robot with 72” reach and dual servo-driven head and tail stock positioners
Welding
- Linde Wire Feed Welders (16) 250-650 amp
- Linde Heliarc welders (4) – 250-500 amp
- Lincoln Wire Feed welders (3) – 450 amp
- Banner 150 KVA spot welder
- Progressive 75 KVA spot welder
- Stud welding equipment
|
|
Rolling
- Roundo, Hydraulic – 1/4” x 10’
- DI-ACRO – 18 ga. x 3’
Quality Assurance
- Romer CimCore – Portable articulating arm, coordinate measuring machine, measures to ± 0.0002 inch
- Versa Gauge – 24” digital measuring device
- Complete range of inspection gauge sets, blocks and dial indicators
Sawing
- Peerless band saw – ±45° miter cut
- DoAll Cut-Off saw
- Grob Bros. 36” vertical band saw
Shot Blasting
- Vac-U-Blast Drive-Thru Booth 16’ wide x 14’ high x 35’ long
- Dry Blast Cabinet, direct pressure - Trinco Model 48x36/DP 850-PC
Painting
- Filter paint booth (2) with overhead trolley
- Fremont Model 1024 spray wand phosphatizing system
- ITW-Ransburg E-Z Flow Two-component metering systems
Plasma Cutting
- Thermal Arc, PAK 10
- ESAB PCM-625i
Drilling
- Johansson radial arm (2) 21/2”, power feed
- Johansson radial arm – 1”, power feed
- Wilton drill press (3) – 7/8” capacity
Machining
- Haas VF-4 Vertical Machining Center
- Bridgeport mill – 8” x 36”, digital readout
- Lagun mill – 9” x 48”, digital readout
- Clausing lathe – 21” swing x 100”
- Indian lathe – 15” swing x 39”
- South Bend lathe – 7” swing x 39”
- Surface grinder – 6” x 18” chuck
Specialty Equipment
- Almco Model OR-10 – 10 cu. ft. orbital deburring machine
- Metco Flame Metal-Spray equipment
- Weigh-Tronix Model 8250 digital scale 48” x 48”, 5000 lbs.
- Rigid Model 1224 pipe threader
|
